Monday, April 23, 2018

Plumes de paon et papillons

Plumes de paon et papillons

Scrapkit used is Chaos Priestess' iB Molly Harrison 107-3
Font used is FTU font by Billy Argel called Dove of Peace.
I also used a brush or two.

Open a New 851x315 Raster Background and flood fill with white
Open Scrap CP_IB-Molly Harrison-107-3-El08 and copy and paste as a new layer.
Open Scrap CP_IB-Molly Harrison-107-3-El10 and copy and paste as a new layer.
I scootched to the left a bit and down, next to the flower in the mask and gave it a drop shadow.
Open Scrap CP_IB-Molly Harrison-107-3-El18, Image Resize 161x315.
Copy and paste as a new layer. I moved below El10 (Flower) and moved it to where I liked it.
Add Drop Shadow.
Open  Scrap CP_IB-Molly Harrison-107-3-El14 and copy and paste as a new layer.
I moved below the paper hearts and up and to the right.  Add Drop Shadow.
Open Scrap CP_IB-Molly Harrison-107-3-El12 and copy and paste as a new layer.
I moved just below the paper hearts and down and to the right .  Add Drop Shadow.
Open Scrap CP_IB-Molly Harrison-107-3-El15 and copy and paste as a new layer.  
I moved below the paper heart but moved to the left and up.  See my tag for reference.
Add Drop Shadow.
Open Scrap CP_IB-Molly Harrison-107-3-El22 and copy and paste as a new layer.
I moved this to just above the mask layer.
I moved to the left, added a Drop Shadow, Duplicate, Image Mirror, Mirror Horizontally,
Image Mirror, Mirror Vertically.  I merged these 2 layers together.
Open Scrap CP_IB-Molly Harrison-107-3-El05 and copy and paste as a new layer.
I moved below the mask layer and to the left.  Add drop shadow.
Layers duplicate, Image Mirror, Mirror Horizontally,
Image Mirror, Mirror Vertically.  I merged these 2 layers together.
Open Scrap CP_IB-Molly Harrison-107-3-El09 and copy and paste as a new layer.
I made sure this was the top layer and I moved it down and to the right so the whole 
butterfly is showing. Add drop shadow.
Open Scrap CP_IB-Molly Harrison-107-3-El04 and copy and paste as a new layer
I moved below the mask layer and down  so the ink was below the stars and jewels.
With your eraser tool, erase any part of the paint brush that is showing.  Change
the opacity to what you like.  Mine is at 48. Layers duplicate, Image Mirror, Mirror Horizontally,
Image Mirror, Mirror Vertically.  I merged these 2 layers together.
Open Scrap CP_IB-Molly Harrison-107-3-El06 and copy and paste as a new layer.
I moved to the far right so that only part of the black brush design is showing. 
Layers duplicate, Image Mirror, Mirror Horizontally,
Image Mirror, Mirror Vertically.  I merged these 2 layers together.
Open Scrap CP_IB-Molly Harrison-107-3-El01, Image Mirror, copy and paste as a
new layer. I moved below the jewel layer and to the left a bit.  I chose to erase some of the
stray part of the reather that was down toward the bottom of the tag.
Now for the border.  Choose a color from the tag (I chose a color from the peacock
feather), Layers, New raster layer, and flood fill with your color of choice.
Selections, Select all.  Image, Crop to selection and that will take care of everything 
you can't see hanging off the sides of your tag!  Selections, Select all.  Selections, Modify
Contract 3 and hit ok.  Selections, Select None.  Now you can leave like that or you can
do what I do.  Adjust Blur Gaussian Blur of 3 and hit ok.  Doesn't look like much but you
have to layers duplicate and then layers merge to get the look you want.
Add copyright and name.  I added a brush layer to the name on mine.

For an Avatar here is what I do. 
I open a New 180x180 raster layer. Go to the top element in the banner tag and click
it to make it active.  With my selection (rectangle) tool make a square. Copy merged and then activate
the avatar and copy and paste as a new layer.  Go to the banner tag. Selections Select None.
Back at the avatar I just line up the bottom left corner. Activate Raster 1, Selections, Select All
then go to your merged layer, Image, Crop to selection.






Wednesday, April 18, 2018

New WWO's at CDO FB Page!

Hi Everyone!
  I have some new WWO's posted at the CDO FB Page with some wallpapers too!
 So come join the fun and request a tag or two!











Tuesday, April 17, 2018

Tourniquet Cluster Frame

Hi Everyone!  I made a Cluster Frame to go with Chaos Priestess' New STUNNING Scrap Kit called Tourniquet that you can purchase at Mystical Scraps! I used in my example the GORGEOUS Artwork of Yuriko Shirou!

Enjoy!
Hugs, Staci

Tourniquet by Chaos Priestess

Hi everyone!  Can I tell you that one of my FAVORITE Gothy Scrap Designers is Back!  The one and only Chaos Priestess!  Her Kit Tourniquet is absolutely GORGEOUS!  So many possibilities!  I am showing off to begin with a tag and a wallpaper I did.  I used one of Sally Gilroy's new tubes  (Click on her name and it will take you to it!) and Chaos Priestess' Scrap Kit Tourniquet, available at Mystical Scraps!

And with this Beauty I made these!

And the Wallpaper is snaggable if you want it!

Hugs, Staci

Monday, April 16, 2018

Hi Everyone!

Well, I think I am going to start this all back up again.  I might show just show the WWO's that I post at the CDO FB Page, I might post an easy tutorial if I feel like writing one, or maybe I might post some other stuff if I feel like it.  I am so not sure anyone is even following this blog anymore LOL but I will do this anyway!
Hugs, Staci

Thursday, June 4, 2015

PTU- Sea Nymph Forum Tag



PTU - Sea Nymph

Tube of choice - I am using a STUNNING close up tube 
by Caron Vinson.  You can purchase this and other
LOVELY artwork at CDO.

Scrapkit used is called Cruise by Hungry Hill. (Thank 
You sooo much for letting me use your kit Alison!  It
is GORGEOUS!)  You can purchase this and other GREAT
scrapkits at CDO.

Font used is a FTU font called Notera.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image.

Open paper-4 and copy and paste as a New Layer.  Activate
your bottom layer, Selections Select All, Activate your
paper layer, Image Crop to Selection.

Open clouds and copy and paste as a New Layer.  I moved the 
bottom cloud up toward the top of the tag.  Activate
your bottom layer, Selections Select All, Activate your
Cloud layer, Image Crop to Selection.

Open horizon-sun and copy and paste as a New Layer.  I 
moved under the cloud layer.  Activate your bottom layer,
Selections Select All, Activate your Sun layer, Image Crop 
to Selection.

Open sand and copy and paste as a new layer.  I moved to 
the bottom of the tag.  Activate your bottom layer, 
Selections Select All, Activate your sand layer, Image 
Crop to Selection.

Open splashes and copy and paste as a New Layer.  I moved 
to the bottom of the tag where the sand ends.  Activate
your bottom layer, Selections Select All, Activate your
splashes layer, Image Crop to Selection.

Open beach_grass_1, Image Resize 150X82, Image Flip and
copy and paste as a New Layer.  I moved to the bottom 
right hand side of the tag.  Layers Duplicate and I moved
it up a touch and further tight.  Layers Merge, Merge Down.
Activate your bottom layer, Selections Select All, Activate 
your Beach Grass 1  layer, Image Crop to Selection.

Open beach_grass_2, Image Resize 150X150 and copy and paste 
as a New Layer.  I moved to the left hand side of the tag.
Activate your bottom layer, Selections Select All, Activate your
beach grass 2 layer, Image Crop to Selection.

Open fence, Image Resize 600X240 and copy and paste as a
New Layer.  I moved down a touch.  Activate your bottom 
layer, Selections Select All, Activate your fence layer, 
Image Crop to Selection. Move behind the beach grass 1 layer.

Open lighthouse, Image Resize 39X150 and copy and paste as
a New Layer.  I moved behind the fence layer.  Add a drop
shadow.

Open net, Image Resize 150X150 and copy and paste as a New
Layer.  I put it on the fence.

Open gull, Image Resize 150X80 I moved to the upper left hand 
side of the tag.

Open your tube of choice.  I used the close up of the tube.
Copy and paste as a New Layer.  If need be, Activate
your bottom layer, Selections Select All, Activate your
tube layer, Image Crop to Selection.

Layers Mege, Merge Visible.

Layers New Raster Layer.  Flood fill with black.  Selections
Select All Selections float/Defloat. Selections Modify 
Contract 4 and hit the delete key once on your keyboard. 
Adjust Blur Gaussian Blur 3.00 and hit OK.

Layers New Raster Layer and flood Fill with a Light Color.
I used #e3dbc1 but you want to use what goes best with your
tag.  Selections, Select All Selections float/Defloat. 
Selections Modify Contract 3 and hit the delete key once 
on your keyboard.  Selections Select None. Now with your 
eraser tool find a brush that is different and use that 
to erase some of the white on the frame.

Add your ©copyright information and Name.

















Thursday, May 14, 2015

PTU-Gothic


PTU-Gothic

I am using the GORGEOUS artwork of Anna Marine and the matching Scrapkit by Foxy's Designz (Ann, Thank You so much for allowing me to use this STUNNING kit!)  You can purchase this Bundle kit at CDO.


I used 2 different masks by Moonbeams and Spiderwebs.

Font used is a FTU font called Queen of the Moon

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a Transparent New Image, 800X700.

Open your tube and copy and paste as a New Layer.

Open Frame7_FD and copy and paste as a New Layer.
Move below your tube layer and position your tube
to where it looks good to you.  Add a drop shadow 
to your tube and frame layer.

With your magic wand click inside the frame layer.
Selections Modify Expand 5.  Open Paper5_FD and 
Copy and Paste as a New Layer.  Move below the 
frame layer.  Selections Invert and hit the delete
key once on your keyboard.  Selections Select None.

With your tube layer active (So you can see) Open 
Element9_FD and copy and paste as a New Layer.  I
moved to the upper right hand side of the frame and
moved below the paper layer.  Add a drop shadow.

Open Element1-FD (With the tube layer activated) and
Cope and Paste as a New Layer.  I moved it to the
upper right hand side and moved it down so it was on 
top of the leaves layer. Add a drop shadow.

Open Element28_FD, Image Mirror, Image Flip and copy
and paste as a New Layer.  I moved to the lower left
hand side of the frame and moved it down under the 
paper layer.  Add a drop shadow.

Open Element2_FD and copy and paste as a New Layer.
I moved to the bottom left hand side of the frame and
moved it down under the paper layer. Add a drop shadow.

Open Element36_FD and copy and paste as a New Layer.
I moved to the lower left hand side of the frame and 
moved under the lacey leaves layer.  Add a drop shadow.

Open Element23_FD and copy and paste as a New Layer.
I moved to the upper left hand side of the frame and 
moved under the paper layer.  There might be a little 
bit hanging under the tag, just use your eraser tool 
to get rid of it. Add a drop shadow.

With your very bottom layer active, Open Paper7_FD and
Copy and Paste as a New Layer.  Open MBandSWMask64 and
with that paper layer active, Layers New Mask Layer 
From Image, Scroll to find the mask and hit OK.  Layers
Merge Merge Group.

With that Masked layer active, Open Paper12_FD and
Copy and Paste as a New Layer.  Open MBandSWMask50 and
with that paper layer active, Layers New Mask Layer
From Image, Scroll to find Mask 50 and hit OK.  Layers
Merge Merge Group.

With your top layer active, Open WordArt1_FD, Image 
Resize 300X109 and copy and paste as a New Layer.
I moved to the bottom right hand side of the tag.

Add your ©copyright information and name.

Enjoy!